Electr. 2-way PI-CCV EPIV, AC/DC 24 V, BACnet MS/TP, Modbus RTU, MP-Bus, 2...10 V, DN 15, Internal thread, Rp 1/2", PN 25, ps 1600 kPa, V'nom 0.35 l/s, Fluid temperature -10...120°C [14...248°F]
Specifications
Valve specifications
Pattern : 2-way
V'nom [l/s] : 0.35
Flow rate adjustable : 30...100% of V'nom
Fluid :Cold and warm water, water with glycol up to max. 50% vol.
Flow temperature : -10...120°C [14...248°F]
Flow temperature note :At a fluid temperature of -10...2°C, a spindle heater or a valve neck extension is recommended.
Close-off pressure : 1400 kPa
Differential pressure Δpmax :350 kPa
Differential pressure note : 200 kPa for low-noise operation
Flow characteristic {Tools} : Equal percentage
Leakage rate {Tools} : Air-bubble tight, leakage rate A
Pipe connection : Internal thread
Actuator specifications
Voltage AC/DC : AC/DC 24 V
Power consumption (running) : 3.5 W
Power consumption (holding) : 1.3 W
Power Consumption For Wire Sizing : 6 VA
Connection Supply Control : Cable 1 m, 6x 0.75 mm²
Control type : BACnet MS/TP
Modbus RTU : MP-Bus DC 2...10 V DC 0.5...10 V Hybrid (communicative / analogue)
Protection category : IP54
| EP015R+MOD | MS/TP, Modbus RTU, MP-Bus, 2...10 V, DN 15, Internal thread, Rp 1/2", PN 25, ps 1600 kPa, V'nom 0.35 l/s, Fluid temperature -10...120°C [14...248°F] |
| EP020R+MOD | Electr. 2-way PI-CCV EPIV, AC/DC 24 V, BACnet MS/TP, Modbus RTU, MP-Bus, 2...10 V, DN 20, Internal thread, Rp 3/4", PN 25, ps 1600 kPa, V'nom 0.65 l/s, Fluid temperature -10...120°C [14...248°F] |
| EP025R+MOD | Electr. 2-way PI-CCV EPIV, AC/DC 24 V, BACnet MS/TP, Modbus RTU, MP-Bus, 2...10 V, DN 25, Internal thread, Rp 1", PN 25, ps 1600 kPa, V'nom 1.15 l/s, Fluid temperature -10...120°C [14...248°F] |
| EP032R+MOD | Electr. 2-way PI-CCV EPIV, AC/DC 24 V, BACnet MS/TP, Modbus RTU, MP-Bus, 2...10 V, DN 32, Internal thread, Rp 1 1/4", PN 25, ps 1600 kPa, V'nom 1.8 l/s, Fluid temperature -10...120°C [14...248°F] |
| EP040R+MOD | Electr. 2-way PI-CCV EPIV, AC/DC 24 V, BACnet MS/TP, Modbus RTU, MP-Bus, 2...10 V, DN 40, Internal thread, Rp 1 1/2", PN 25, ps 1600 kPa, V'nom 2.5 l/s, Fluid temperature -10...120°C [14...248°F] |
| EP050R+MOD | Electr. 2-way PI-CCV EPIV, AC/DC 24 V, BACnet MS/TP, Modbus RTU, MP-Bus, 2...10 V, DN 50, Internal thread, Rp 2", PN 25, ps 1600 kPa, V'nom 4.8 l/s, Fluid temperature -10...120°C [14...248°F] |
| EP065F+MOD | Electr. 2-way PI-CCV EPIV, AC/DC 24 V, BACnet MS/TP, Modbus RTU, MP-Bus, 2...10 V, DN 65, Flange, PN 16, ps 1600 kPa, V'nom 8 l/s, Fluid temperature -10...120°C [14...248°F] |
| EP080F+MOD | Electr. 2-way PI-CCV EPIV, AC/DC 24 V, BACnet MS/TP, Modbus RTU, MP-Bus, 2...10 V, DN 80, Flange, PN 16, ps 1600 kPa, V'nom 11 l/s, Fluid temperature -10...120°C [14...248°F] |
| EP100F+MOD | Electr. 2-way PI-CCV EPIV, AC/DC 24 V, BACnet MS/TP, Modbus RTU, MP-Bus, 2...10 V, DN 100, Flange, PN 16, ps 1600 kPa, V'nom 20 l/s, Fluid temperature -10...120°C [14...248°F] |
| EP125F+MOD | Electr. 2-way PI-CCV EPIV, AC/DC 24 V, BACnet MS/TP, Modbus RTU, MP-Bus, 2...10 V, DN 125, Flange, PN 16, ps 1600 kPa, V'nom 31 l/s, Fluid temperature -10...120°C [14...248°F] |
| EP150F+MOD | Electr. 2-way PI-CCV EPIV, AC/DC 24 V, BACnet MS/TP, Modbus RTU, MP-Bus, 2...10 V, DN 150, Flange, PN 16, ps 1600 kPa, V'nom 45 l/s, Fluid temperature -10...120°C [14...248°F] |
